home about us catalog products design & development careers contact us

Brush Oilers Choose Size & Type of Brush For best lubrication of chain, locate brush on lower inside surface of chain so oil will penetrate links by centrifugal force. Brush should just cover width of chain. Gits Flat Brush mounted diagonally fits chain from 3/8" to 2-1/4" wide. Use standard bristles for most applications. For high speed bristles over use crimped Nylon up to 250 deg F, stainless steel bristles over 250 deg F. Nylon Roto Brushes are designed for litho ovens and other heavy duty uses. Item # Shape Type Diameter 09561 Flat Nylon - 09562 Flat Stainless - 09570 Roto Nylon - 09571 Roto Stainless - 09573 Round Nylon 5/8" 09551 Round Nylon 1" 09574 Round Stainless 5/8" 09552 Round Stainless 1" Brush Adaptor Mount brush so that bristles lightly "finger" the chain. Periodically rotate brush and reset height to compensate for brush wear. When 1/2" of an adjustment is reached brush should be replaced with new Gits brush. Item # 09540 Item # 09540 Sight Feed Valve The proper oil feed is just enough to keep the bristles damp. This is easily controlled by the sight feed valve. The drops can be observed and adjusted over a wide range, or can be completely shut off. The proper setting is retained with a friction screw. IMPORTANT: Locate feed valve where it can be conveniently and safely observed and adjusted. Item # 09530 Item # 09530 Coupling This coupling is used to connect the sight feed valve to the dispenser. For remote location of the dispenser use 1/4" copper tubing and 1/8 NPT fittings between coupling and sight feed valve. Use No. 09522 to connect two or more sight feed valves together. Item # 09520 / Item # 09522 Item # 09520 09522 Visual Dispenser Transparent Acrylic reservoir permits a quick visual check of oil supply. Large, self-closing cap is easy to fill and keeps out the dirt. Flow is controlled by a valve which immediately starts or stops the gravity feeding of the sight feed valve. To mount the dispenser simply provide a bracket to hold the 5/8" x 18 NPT threaded mounting shank. Solenoid Valve Model Recommended for intermittent use or for remote location of dispenser. Flow is automatically controlled to stop and start with the machine driving motor. The normally closed electric solenoid valve is usually wired across the motor, or to a switch or timer. Supplied with No. 09581 standard 115 volt coil. Solenoids- Waterproof A/C current available on special order equipped with 480V/60HZ, 575V/50HZ, 200V/50HZ, 380V/50HZ, 120V DC, 240V DC, 480V DC, 575V DC, 12V DC, 24V DC. Power Model Replacement Valve Coils (Waterproof) 120V/60HZ 09581 Manual Valve Model Easy to turn on and off by hand with the toggle mounted on the dispenser. Item # Type Cross Section Capacity A (Dia) B D Visual Dispenser Manual w/Side Shut-Off 09502 Acrylic A 1 PT 3-1/2 7-3/16 7-3/16 09503 Glass A 1 PT 3-1/2 7-3/16 7-3/16 09504 Acrylic A 1 QT 4-1/4 8-1/2 9-1/8 09505 Glass A 1 QT 4-1/4 8-1/2 9-1/8 09506 Acrylic A 1/2 GAL 5-1/2 10-5/8 11-1/4 09507 Glass A 1/2 GAL 5-1/2 10-5/8 11-1/4 09508 Acrylic A GAL 5-1/2 15-5/8 16-1/4 Item # Type Cross Section Capacity A (Dia) B D Solenoid Visual Dispenser Automatic w/Solenoid Valve Shut-Off 09512 Acrylic B 1 PT 3-1/2 7-3/16 7-3/16 120V/60HZ 09513 Glass B 1 PT 3-1/2 7-3/16 7-3/16 120V/60HZ 09514 Acrylic B 1 QT 4-1/4 8-1/2 9-1/8 120V/60HZ 09515 Glass B 1 QT 4-1/4 8-1/2 9-1/8 120V/60HZ 09516 Acrylic B 1/2 GAL 5-1/2 10-5/8 11-1/4 120V/60HZ 09517 Glass B 1/2 GAL 5-1/2 10-5/8 11-1/4 120V/60HZ 09518 Acrylic B GAL 5-1/2 15-5/8 16-1/4 120V/60HZ

© 2008 Gits, an Actuant company